Arduino pro mini

From mems wiki
Revision as of 01:32, 14 September 2016 by Mem (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

About

Burning Bootloader using avrdude

Wire according to diagram shown in this article: https://www.arduino.cc/en/Hacking/MiniBootloader

Ensure your arduino uno is configured as "Arduino as ISP"

run this command from the terminal (note I assume linux, but it should work in windows).

avrdude -P /dev/ttyACM0 -c arduino -p m328p

If avrdude can talk to your device you should see something like this:

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.

root@linux1:~# avrdude -P /dev/ttyACM0 -c arduino -p m328p

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)

avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.